| Model |
: |
MN 31 BULKER |
| GVW |
: |
31000 kgs |
| Engine |
: |
MAXXFORCE® 6.12 TCA 7.2 litre, TCIC BSIII |
| Transmission |
: |
6 forward Synchromesh, 1 Reverse |
| Max. Power |
: |
151kW(202hp) @ 2200 rpm |
| Max. Torque |
: |
920Nm @ 1250 rpm |
| Max. Geared Speed |
: |
85 kmph |
| Gradeability |
: |
23.0% |
| Chassis Frame |
: |
Ladder Type, Uniform C section |
| Steering |
: |
Hydraulic power assisted tiltable & telescopic |
| Brakes |
: |
Dual Split S-CAM, 10 bar system. |
| Fuel Tank |
: |
417 litres (250, 350 litres - Optional) |
| Wheels & Tyres |
: |
10R20 - 16 PR (Cross ply : Optional) |
| System Voltage |
: |
24 V (2 x 12) |
Wheel base
inside |
: |
6100 mm |
| Cabin |
|
Single Sleeper |
| Cabin Tilting |
: |
Manually operated Hydraulic assisted |
| Vehicle Tracking System |
: |
Factory Fitted |
| Suspension |
: |
Rear: Semi elliptical laminated leaf springs.
Front: Double acting type with shock absorber. |
| Rear Axle |
: |
Banjo type, Single reduction,
fully floating axle shafts |
| Front Axle |
: |
Extra heavy duty forged
I beam Reverse Elliot type |
| Application Goods |
: |
Cement, Fly Ash |
| GVW |
: |
31000 kgs |
| Volume |
: |
27 m3 |
| Discharge |
: |
1 MT/Min (approx) |
| Loading |
: |
2 x 450 mm diameter manholes filling by gravity |
| Working pressure |
: |
2 bar above atmosphere |
| Test pressure min |
: |
2.86 bar above atmosphere |
| Pressure gauge |
: |
High quality pressure gauge 0 to 4 bar range |
| Relief Valve |
: |
High quality safety relief valve set at 2 bar |
| Aeration system |
: |
High quality aeration pad. |
| Air feed rate |
: |
1200 m3/h |
| Air feed pipe |
: |
3 inch |
| Air connector |
: |
3 inch Camlock coupling. |
| Delivery Pipe |
: |
5 inch |
| Discharge Valves |
: |
Butterfly type & 5 inch quick camlock coupling |
| Access ladders |
: |
1 nos on left side |
| Catwalk |
: |
1 nos on left side |
| External Surface |
: |
Two coats paint system |
